1043
MULTI FIT/CHOPPER
Chrome Switch Housing Kit
includes 48” long wiring har-
ness, chrome switch housings
with chrome switches and hard-
ware. Fits 1996-2011 FXST,
FLT, FXD, 1996-2011 FLST.
VT No. 32-0561
32-0540
32-0752
Handlebar Switch Kits with wiring.
VT No.
OEM
Year/Model
Item
Finish
32-0752 Set
1996-06
7 Piece Set, (60”)
Black
32-0540 Set
1996-06
7 Piece Set, (48”)
Chrome
32-0816 Set
1996-06
7 Piece Set, (106”)
Chrome
32-0578 Set
1996-06
7 Piece Set, (60”)
Chrome
32-1272 Set
1996-06 LED
60”
Chrome
32-0848 Set
2007-13 XL, FXD, FXST
Chrome
32-0849 Set
2007-13 XL, FXD, FXST
Black
32-0996 71685-06
2006-up FXD
Left
32-7000 71589-96 1996-13
Engine-Start-Stop
Black
32-7001 71590-96
1996-07
Stop Light 6” Wire
Black
32-7024 71621-08
2008-11 FXST, FLST
Stop Light
2008-13 FLT
32-7025 71620-08
2008-11 FXD
Stop Light
2008-13 XL
32-1630 71500118
2012-up FXST, FLST, Stop Light
FXD, 2014-up XL
37-0994 71509-00
1996-13
Stop Switch Shim
32-7002 71591-96
1996-13
Right Turn Signal
Black
32-7003 71597-96
1996-13
Dimmer Horn
Black
32-7004 71598-96
1996-13
Left Turn Signal
Black
37-0882 2955
1996-13
Switch Mounting Screw, 10 pack
32-1219 71584-96B
1996-13
Clutch Handle Switch
32-0816
Handlebar Switches for 1996-13 FX-XL
32-1272
20" Wire Extension Kit for Handlebar Switches.
VT No. Fits
32-7817 2007-up models without Cruise Control 14 Wires
32-7820 2007-up models with Cruise Control 17 Wires
32-7817
32-7820
Front Turn Signal 36” Extension Harness
for all 2011-up FXST, FLST, and 2012-17
FXD models with turn signals mounted under
the handlebar switch housing. This extension
harness will allow the installation of taller than
stock bars and the relocation of turn signal
assemblies. The only way to move the turn sig-
nals is to cut the turn signal wiring that is hard
wired into the circuit board installed in the han-
dlebar switch housing. This harness will allow
you to cut the wiring, heat shrink the cut wire
to prevent a short, solder on extension harness
and simple connect the other end of the har-
ness into the factory connector located under
the fuel tank.
VT No. 32-3601
Fit 2011-up FXST, FLST, 2012-up FXD,
2014-up XL
32-6676 + 4”
32-6677 +8”
32-6678 +12”
32-6679 +15”
Fit 2007-10 FXST, FLST, 2007-11 FXD,
2007-13 XL
32-6656 +4”
32-6657 +8”
32-6658 +12”
32-6659 +15”
Fit 1996-06 FXST, FLST, FXD, XL
32-6664 +4”
32-6665 +8”
32-6666 +12”
32-6667 +15”
Turn Signal Kits.
VT No. Length
32-6672 4”
32-6673 8”
32-6674 12”
32-6675 15”
Front Turn Signal Extension Harness used
for installing taller handlebars on all models
when keeping turn signals mounted on handle-
bar switch housings on 1996-12 models. No
crimping required. De-pin factory harness and
connector and install new extension harness.
VT No. Extension Over Stock Length
32-6557 4”
Ready to Install
Handlebar Exten-
sion Harnesses
• All the items needed
to successfully extend
the wiring to a set of
handlebar switches.
Harnesses include
both male and female
Molex terminals
crimped on each
end. Feature color
matching wire as per
original harness.
Front Brake Switch fits 2012-
up FXST, FLST, 2014-up XL.
OEM # 71500118
VT No. 32-1630
Standard Backlit LED Handlebar Switches and Wiring
Harness without switch housing. LED is amber and wires are
60” in length.
VT No.
Fits
32-1135 2007-13 FXST-FXD
32-1272 1996-06 FXST-FXD
32-1273 1996-06 FXST-FXD
Switch Wiring Harness 1996-up