901
XL
Hoses Listed are of stock type rubber construction are D. O.
T. approved.
Front
VT No.
OEM
Length
Fits
23-0732
45521-74A 40”
1974-77 XL
23-0723
45121-77 19”
1977-79 XL Lower only
1980-82 XL
23-0726
45121-77 19”
1977-79 XL Lower only
Rear
23-2310
44438-87B
Late1987-03 XL
23-2317
44429-06B
2006-11 XL
Replica Brake Hose
Brake Banjo Seal Washers feature built in O-Rings.
VT No.
OEM
Type
14-0567 41733-88 ⁷₈”, 12mm fits handlebar cylinders
1984-00, single disc
14-0568 41731-88 ³₈”, 10mm fits 1982-00 Dual Disc
Brake Calipers
14-0578 41731-01
Fits 2001-up Master Cylinder &
Brake Calipers
Chrome Banjo Bolt Kits for use with universal or stock lines,
front and rear, washers included. The VT No. 37-8979 is to be
used when a master cylinder or caliper uses a ³₈-24 banjo bolt
and the line has a 12mm hole instead of 10mm.
VT No.
OEM
Line
Size/Item
23-0612 41747-82A 10mm ³₈-24
23-0613 41731-82 10mm Washers
23-0614 41739-84 12mm ⁷⁄₁₆-24
23-0615 45583-83 12mm Washers
37-8979
Special Kit
12mm ³₈-24
14-0568
41731-88
10mm Washer with O-Ring
14-0567
41733-88
12mm Washer with O-Ring
23-0882
2004-up XL 10mm Hex
23-0883
2004-up XL 12mm Hex
2300-3
2004-up XL 10mm Dome Hex
2302-3
2000-up XL 12mm Dome Hex
23-0612
Brake Hose Fittings for front master cylinder, chrome.
VT No. OEM
Type
26-0622 43307-78 Angle
23-0517 Converts 10mm late threads to ¹⁄₈” NPT with inverted
flare,early thread hose type, straight.
26-0622
23-0517
Banjo Bolt by Russell accepts brake light
switch and eliminates the need for junc-
tion block. Replaces the standard
3
/
8
x 24
bolt. Sold each.
VT No. 23-0746
Chrome Front Replacement Brake Tees for XL’s.
VT No. OEM
Fits
23-0708 44311-80 1982
23-0705 43310-77 1979-81
23-0705
23-0708
Chrome Stock Billet Brake Clips.
VT No. 36-0351
36-0351
Allen Button Head Banjo Bolts sold with washers.
VT No.
Size
MM
37-8517 ³₈-24
10
37-8518 ⁷⁄₁₆-24
12
Universal Straight Chrome Union with bracket.
VT No.
Thread
23-0635 ¹₈ NPT
23-0688 ³₈-24
Brake Tees
23-2310
23-0723
23-0726
Chrome Steel Brake Line Tees
VT No.
Type
23-0570
Center hole inverted flare ³₈”- 24 UNF, side
tubes
³₈
”- 24 UNF, mounting hole ⁵₁₆” I.D.
23-0571
Center hole 1/8”- 27 NPT,side tubes
³₈
” - 24 UNF, mounting hole ⁵₁₆” I.D.
23-0572
Center hole & side tubes ¹⁄₈” - 27 NPT,
mounting hole ⁵₁₆” I. D.
Billet Aluminum Brake Tees
VT No. Type
23-9227 Front ³₈-24 inverted flare in all 3 holes
23-9228 Rear ³₈-24 inverted flare in 2 holes and ¹⁄₈” NPT in
center hole
23-0570
23-0571
23-0572
23-0732