715
CLASSIC
Stock Intake Manifolds are of cast alloy as original.
VT No. Fits
Type
35-0085 1966-77 FX O-Ring
35-0084 1978-84 FX Flat Seal
Intake Manifold
1966-84
35-0085
Manifold Spacer replaces 29250-78
on 1971-88 models. ³⁄₈” thick.
VT No.
Item
15-0141 Stock Spacer, each
15-0142 Gaskets, Non-beaded
15-1144 Gaskets, Beaded
15-1019 Spacer Kit, James
(1³⁄₄” inner diameter) Stock
15-1162 Spacer Kit, James
(1¹³⁄₁₆” inner diameter) Custom
15-0141
35-0084
1966-77 Intake Manifold Rings update early style O-Ring
intake manifolds or cylinder heads to late style flat band type
seals. Available for stock or stroker .200 taller cylinders. Set
includes four standard and two stroker rings.
VT No.
Type
Quantity
35-0411
Adapter Rings, Stock 10
35-0412
Stroker Rings
10
35-0429 Set
V-Twin Style Intake Clamps are two piece type polished brass
or chrome.
VT No.
Years
Type
Finish
Note
35-0406
1955-77
O-Ring
Chrome
No Seals
35-8026
1978-84
Flat Seal
Chrome
No Seals
35-0193 1957-77 O-Ring
Brass
Seals
35-0192
1978-84
Flat Seal
Brass
Seals
1978-84 Intake Clamp Set
includes four pieces of single
use clamp, installed by VT No.
16-0050 tool.
VT No. 35-0419
35-0193
35-0192
Stock Style Intake Clamp Sets include O-ring or seals for
proper year and feature fillister or allen screws as original.
Available in chrome or stainless.
VT No. Year
Finish
Screw
35-0408 1955-77 Chrome Allen
35-9177 1955-77 Stainless Fillister
35-0410 1978-84 Chrome Allen
35-0418 1978-84
Stainless
Fillister
Replica Intake Clamp Set features fillister
head screws.
VT No.
Year
Finish
35-0417
1955-56 Cadmium
35-0439
1957-76 Cadmium
35-0443 1957-76 Zinc
35-0440 1977-84 Zinc
35-0439
Polished Stainless Intake
Manifold Clamps are strong yet
easy to install. Fit all 74” 1955-
Early 78 and Sportster 1957
Early1978 models with O-rings.
VT No. Item
35-0407 Clamp Kit
14-0519 O-Rings 10 pack
35-0407
35-0408
35-0410
Intake Manifold Clamp
35-8026
35-0406
Intake Manifold O-Rings and Seals.
James VT No.
Year
Type
—
14-0519
1955-77 FL O-Ring
14-0626 14-0113
1978-85
Flat Seal
—
14-0924
1978-85
Flat Seal Red Silicone
14-0924
14-0519
14-0113
Intake Clamp Update Kit for
1955-84 models. Kit includes
manifold rings, Silicone seals
and stainless clamps. Use to
update early intakes to late style
seals or when intake flanges
are damaged on early heads.
VT No. 35-0436
V-Twin’s 360° Power Intake Clamp is full stainless steel
which features a “floating bridge.” Closes the gap under the “T”
bolt for total 360° wrap around seal. The best available sold as
a set with O-Rings or seals.
VT No. Power Type
Item
U/M
35-0415 35-0449 1955-77 O-Ring
Kit
35-0409 35-0448 1978-84 Flat Seal Kit
14-0519
1957-77 O-Rings
10 pack
14-0113
1978-85 Flat Seals 10 pack
35-0409
35-0449
CV Carburetor Adapter adapts HSR-42
Mikuni or CV carburetor to two bolt mani-
fold. Use spigot seal VT No. 14-0180. Fits
two bolt early style.
VT No. 35-9150
Panhead Manifolds.
VT No. Type
35-0106 S&S
35-0941 1⁷⁄₈”
35-8017 Spigot
35-0103 Bendix-Keihin