background image
645
CLASSIC
Chrome Knucklehead Upsweep Pipe Set includes front and 
rear upsweep pipe set for rigid frames. Front Pipe is two piece 
type. Use 1¾” extensions or mufflers. 
VT No. 
Type 
29-0094 
Upsweep 
30-0580 
Stacked Upsweep
 
31-9920 
End Clamps
 
31-2101 
P-Clamps
29-0094 
Installed
30-0580
29-0094
Shot Gun
 Drag Pipe
Upsweep Exhaust
29-0090 Installed
Shot Gun Drag Pipe Sets for Rigid or Swing Arm models as 
noted. Bracket not supplied. Note type of front pipe. Outside 
is a 2 piece set, flat pipe type is three piece set.
VT No. 
Model 
F Pipe 
Frame
30-3163 Panhead 
Flat 
Rigid
30-3205** Panhead 
Flat 
Rigid
**Note: Side by side shorty
30-3155
30-3153
29-0088 
Installed
30-3205 Installed
Shot Gun Exhaust Systems fit Rigid or FXST-FLST frames 
only. Will not fit frame with shocks unless noted. Available as 
a drag pipe with slash cut ends or with tapered muffler. Pipes 
have 1
3
/
4
” outside diameter unless noted. 
Drag Fits 
30-3158
  1970-84 Shovelhead Kickstart only
30-3155  1966-69 Shovelhead
30-3164  1966-84 FX-FL
*Note: 40” Pipe Set clears shocks and FXE Battery. 
Designed for swing out kick arm VT No. 17-0307.
30-3164
Important Note: 
Some items on this page may be emission-related parts subject to California or other emission control laws. Please see 
note for important information regarding emission control regulatory compliance and warranty information.
T-Bolt Set is a replacement for all 
of our muffler pipes which have 
channel type mounting. Supplied 
with nut.
VT No. 
U/M
31-2116 Pair
31-0223 
10 pack
31-2116
Up Sweep Header Sets will accept straight fishtail extensions 
or mufflers which must be purchased & mounted separately.
VT No. 
Model 
 
Year   
Note/Frame
29-0092  Panhead   
1948-57 
#1 Rigid
1. Features ‘S’ type front pipe for better ground clearance. Three piece system
Up Sweep Header Sets will accept straight fishtail extensions 
or mufflers which must be purchased & mounted separately.
VT No. 
Model 
 
Year   
Note/Frame
29-0090  Early Shovelhead  1966-69 
#1-2-3 Rigid
29-0088  Shovelhead 
1970-84 
#2 Rigid 
29-0085  Shovelhead 
1970-84 
#4 Swing Arm 
1. Features ‘S’ type front pipe for better ground clearance. Three piece system. 
2. Will not fit with electric start wrap around oil tank. 
3. To be used with hydraulic brakes only. 
4. Can only be used with FXE type Battery Box
Shot Gun Drag Pipe Sets for Rigid or Swing Arm models as 
noted. Bracket not supplied. Note type of front pipe. Outside 
is a 2 piece set, flat pipe type is three piece set.
VT No. 
Model 
F Pipe 
Frame
30-3153 Knucklehead  Flat 
Rigid
Shot Gun Drag Pipe Sets
VT No. 
Model 
F Pipe 
Frame
30-3164 Shovelhead  Flat 
Rigid
30-3155 Shovelhead  Outside  Rigid
**Note: Side by side shorty