394
Intermediate Jets fits all S&S carburetors.
VT No. Size/No.
VT No.
Size/No.
35-0350 025 #1
35-9174 .032
35-9173 .0265
35-0354
.033 #4
35-0351 .028 #2
35-0355
.036 #5
35-0352 .0295 #2 1/2
35-0356
.040 #6
35-0353 .031 #3
Jets for S&S
Main Jets for S&S. Use when installing new exhaust system
or just tuning for better performance and mileage. Sizes avail-
able in increments of .002 and ranges in sizes from .040 to
.104. Sold each.
VT No.
Size
35-0300 .040
35-0301 .042
35-0302 .044
35-0304 .046
35-0305 .048
35-0306 .050
35-0307 .052
35-0308 .054
35-0309 .056
35-0310 .058
VT No.
Size
35-0312 .062
35-0313 .064
35-0314 .066
35-0315 .068
35-0316 .070
35-0317 .072
35-0318 .074
35-0319 .076
35-0320 .078
35-0321 .080
35-0322 .082
VT No.
Size
35-0323 .084
35-0324 .086
35-0325 .088
35-0326 .090
35-0327 .092
35-0328 .094
35-0329 .096
35-0330 .098
35-0331 .100
35-0332 .102
Pingel® Power Flow Valve has a single out-
let with reserve. Manufactured as a one piece
billet brass unit featuring a 6AN threaded fit-
ting for fuel line hook up using stainless steel
hose and fittings, carburetor fitting for Super
‘E’ & ‘G’ sold separately.
VT No.
Item
35-0420 Petcock
35-0421 S&S Carburetor Fitting
Fuel Line has a preformed bend which is kink resistant. Line
has 90° formed bend.
VT No. Type Size
35-0561 Clear 20” x ⁵⁄₁₆”
35-0562 Black 20” x ⁵⁄₁₆”
Enricher for S&S
Super E & G fea-
tures 3 positions.
VT No. Type
35-0170 Pike
35-0854 O-Ring
Enricher Assembly for S&S can be used on S&S
Super ‘E’ & ‘G’ carburetors when a aftermarket air
cleaner or velocity stack is used. Does not require
lever assembly. Features full on or full off operation
only.
VT No. 35-0152
Sifton Enricher for S&S, fits Super ‘E’ & ‘G’ and ‘B’
carburetors, includes chrome knob.
VT No. 35-0466
Long Float Bowl Screws fit S&S ‘E’ carbu-
retors, to facilitate easy removal of bowl.
VT No. Finish
35-0025 Brass
35-0029 Chrome
Throttle Cable Brackets for S&S. These
brackets allow the use of stock type cable on
S&S “E” & “G” carburetors.
VT No.
Type
Years
35-0150 Short 1981-89
35-0151 Long 1990-up
35-0854
35-0170
35-0170
Installed
35-9355
Jet Assortment for S&S Super ‘E’, ‘G’ and ‘B’ carburetors.
Complete kit includes 7 intermediate jets from .025" to .033"
and a main jet kit only which includes 14 main jets from .062" to
.084".
VT No. Kit
35-0995 Complete
35-0287 Main Only
35-0995
35-0287
S&S Super ‘E’ & ‘G’ Rebuild Kits & Replacement Parts.
Rebuild kits contain all the parts necessary for a complete over-
haul.
VT No.
Fits
35-0850 Super ‘E’ Body Kit VT
35-9185 Super ‘E’ Body Rebuild S&S
35-9186 Super ‘G’ Body Rebuild
35-0966 Accelerator Rebuild Only, Super ‘E’ & ‘G’ V-Twin
35-9187 Accelerator Rebuild Only, Super ‘E’ & ‘G’ S&S
35-9240 Super ‘E’ Master Rebuild
35-9355 Sifton Super ‘E’ Rebuild
35-9183 Super ‘E’ Float for Above
35-9189 Super ‘E’ Float VT
35-0849 360° Carburetor Fuel Inlet
15-0319 Float Bowl Gasket Only, Super ‘E’ & ‘G’ each
35-0234 Needle and Seat Super ‘E’ & ‘G’
35-0970 Needle and Seat Super ‘E’
35-0978 Needle Only
35-0924 Needle Seat with elbow
35-0235 ¹⁄₄” Insulator Block, 1⁷⁄₈” Carburetors
35-0258 ¹⁄₄” Insulator Block, 2¹⁄₁₆” Carburetors
35-2388 Replacement Float Bowl Super ‘E’ & ‘G’
35-0102 Intake Manifold, for all S&S B & E 1-7/8" Carb
35-9187
35-0235
35-0850
Brass Petcock for S&S “E” Carburetor bolts
directly to bowl.
Note: For use with ⁵⁄₁₆” fuel
line.
Note: For use with ⁵⁄₁₆” fuel line.
VT No. 35-0935
Important Note:
Some items on this page may be emission-related parts subject to California or other emission control laws. Please see
note on for important information regarding emission control regulatory compliance and warranty information.
Warning for California Users: This product may contain substances known to the State of
California to cause cancer and/or reproductive toxicity.
36-0541 Installed
Throttle Cable Adapter Block
allows use of stock 1996-up
throttle cables on S&S E carbu-
retors.
VT No. 36-0541
36-0541