Oil Pump for
Twin Cam “A” Crankcase Breather
Valve features a machined Billet aluminum
body which contains four steel reed valves.
Valve body slides over pinion shaft and fits
inside pinion bearing bore and will allow air
and oil mist to escape from the crankcase
but will not allow them to re-enter.
VT No. Fits
12-2071 2003-17 FXST, FLST, FXD
Twin Cam Oil Pump
Alignment Tool. This tapered
tool threads into the oil pump
and perfectly aligns the pump
to the cam plate. Fits 1999-17
VT No. 16-0998
Twin Cam Oil Pressure ByPass Shim. This machined shim
assures proper spring pre load improving oil pressure and
volume. Fits 1999-17 FXST-FLST-FXD, 1999-16 FLT.
VT No. Unit of Measure
12-0108 5 Pack
Twin Cam Super Pump by Sifton utilizes an oversized highly efficient Geo Rotor
design. Provides a 40% increase in pump volume and a 60% more scavenging
volume. This high volume pump bolts into the stock location and includes O-Rings
and mounting hardware.
1999-05 FXD, 1999-06 FXST, FLST, FLT
2006-17 FXD 2007-17 FXST, FLST, 2007-16 FLT
Spring Alignment and Installation
Tool replaces the screwdriver and easily
compresses the spring to install the split
pin without damaging the bore.
VT No. 16-0300
Chrome Crank Sensor Cover Includes mount
screw. 1999-up FLT, 1999-17 FXD.
VT No. 42-0953
V-Twin Inner Cam Bearing Tool safely
installs the inner cam bearings to the proper
depth in the case without damaging bear-
VT No. 16-1390
Inner Cam Bearing Remover Tool allows
removal of needle bearing and will also keep
needles from falling into engine. For use on
2006-17 FXD, 2007-17 FXST, FLST, 2007-16
VT No. 16-1351
Head Bolt Bridge. Bolts on!
Silver Black Model Fits
42-1152 42-1153 EFI
1999-17 FXST, FLST, FXD,
42-1154 42-1155 Carb
1999-06 FXD, FXST, FLST, FLT
2000-17 FXST, FLST,