|
|
 |
|
|
Electrical |
|
|
|
|
 |
|
|
|
|
 |
|
|
|
|
|
Charging and
Ignition System
Testers. Hand
hold testers with
simple good/bad
indicators.
Charging tester
works on all
1976-up Big Twins and will test overall
charging system, stator output and regulator.
|
|
|
|
|
|
|
 |
|
|
|
|
|
|
|
| 14-18mm Spark Plug Hole Thread
Chaser renews damaged threads 13/16.
Removes carbon and corrosion with a few
turns. Allows firm seating of plugs.
Assures metal to metal contact for effective
heat transfer. |
| VT No. |
Price |
16-0603 |
$18.00 |
|
|
|
|
|
|
|
|
|
|
|
| Ignition tester works on all stock and
replacement electronic ignition systems
and tests overall condition of module
and pick-up. |
| VT No. |
Price |
Item |
16-0729 |
$193.00 |
Charging System Tester |
16-0730 |
$114.00 |
Ignition System Tester |
|
|
|
|
|
|
|
|
 |
|
|
|
|
|
| Super Smart Battery Tender constantly
monitors battery without the damaging
effects of a trickle charger. Initial charge
brings battery up to full charge then converts
to a float charger, keeps a 12 volt
battery at 13.6 volts. |
| VT No. |
Price |
Type |
16-1792 |
$69.00 |
12 volt |
16-1793 |
$69.00 |
6 volt |
16-1870 |
$40.00 |
12 volt, Junior Tender |
16-1871 |
$40.00 |
6 volt, Junior Tender |
16-1794 |
$10.00 |
Snap Cord |
|
|
|
|
|
|
|
|
| Battery Hydro-meter is a great tester for
cycle batteries because of its small size. |
| VT No. |
Price |
16-0864 |
$108.00 |
|
|
|
|
|
|
|
|
|
 |
|
|
 |
|
|
|
|
|
|
|
|
| “Activator” Battery Filler attaches to
any standard acid pack tube. Positive
thumb release valve absolutely controls
acid flow. No acid spills, burns or holes in
clothing. |
| VT No. |
Price |
16-0037 |
$50.00 |
|
|
 |
|
|
|
|
|
|
|
| Custom Battery Cable KIt includes 25’
cable, (20) 1/4” terminals, (12) 5/16” terminals,
(8) 3/8” terminals, 40 pc, black heat
shrink and 12pc red heat shrink. Available
with clear or black cable. |
| VT No. |
Price |
Item |
32-1350 |
$198.00 |
Clear Kit |
32-1351 |
$198.00 |
Black Kit |
16-0351 |
$50.00 |
Crimping Tool |
|
|
|
|
|
|
|
 |
|
|
|
|
|
| Battery Tender Lightweight Chargers
(Power Tender). 6 amp features ring type
terminals without quick disconnect.
Available for standard lead/acid batteries
or sealed AGM batteries. |
For Lead/Acid Batteries
| VT No. |
Price |
Volts |
16-1873 |
N/A |
6 |
16-1875* |
$125.00 |
12 |
*Note: Also
For Sealed AGM Batteries
|
|
|
|
|
|
|
|
 |
|
|
|
|
|
Wire Terminal Tool
replaces 97362-71,
depresses terminal lock
tabs in disassembly of
factory wiring harness.
|
| VT No. |
Price |
16-0959 |
$24.00 |
|
|
|
 |
|
|
|
|
|
 |
|
|
|
|
|
|
|
|
 |
|
|
|
|
| Deutsch Terminal
Crimping Tool is
designed to correctly
crimp Deutsch
Connectors. Replaces
39965. |
| VT No. |
Price |
16-1295 |
$338.00 |
|
|
|
|
|
|
| Battery Booster Cable Set. 10 feet in
length. 10 gauge in size. |
| VT No. |
Price |
16-0350 |
$26.00 |
|
|
|
|
|
|
|
|
| Deka Power Sports Advanced Battery
Charging System. A 12 volt 2.0 amp
automatic battery tender for both AGM
and lead acid batteries. Features LED
indicator lights. Reverse polarity protection,
spark free operation and automatic
switch to float mode. |
| VT No. |
Price |
16-0086 |
$70.00 |
|
|
|
|
|
|
|
|
|
 |
|
|
|
|
| Wire Terminal
Tool crimps factory
style wire
end. |
| VT No. |
Price |
16-0710 |
$73.00 |
|
|
|
|
|
 |
|
|
|
|
| Dyna Charge
Monitor. The
DCM-1 evaluates
voltage in a charging
system and
indicates whether
system voltage is
too low or high.
Unit is designed for
12 volt
systems and features LED indicators. |
|
|
|
|
|
|
|
|
|
 |
|
|
|
|
|
| Spark Plug Wire Tool
strips 7 and 8 mm ignition
wire, crimps spark
plug and distributor terminals.
|
| VT No. |
Price |
16-0514 |
$46.00 |
|
|
|
 |
|
|
|
|
| Volt Meter reads 8-
16 volts on a 48
mm diameter face. |
| VT No. |
Price |
32-0702 |
$40.00 |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| VT No. |
Price |
32-9088 |
$59.00 |
|
|
|
|
|
|
| 1266 |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
