|
|
 |
|
|
 |
|
Cylinder |
|
|
|
|
 |
|
|
|
|
|
|
|
 |
|
|
|
|
|
| Sifton Dowel Guide Plate is precision
drilled to press cylinder dowels in straight
on 1984-up BT and XL models. |
| VT No. |
Price |
16-0837 |
$24.00 |
|
|
|
|
|
|
|
|
|
 |
|
|
 |
|
|
|
|
|
| Exhaust Stud Drill Fixture fits 1984-up
Ex BT & XL ports to align for drilling of
broken exhaust stud. |
| VT No. |
Price |
16-0698 |
$105.00 |
|
|
|
|
|
|
|
|
|
|
|
|
| Dual Gauge Leak Down Tester enables
the engine builder/tuner a way to pin point
leakage of the piston bore, rings, valves,
heads and gaskets. |
| VT No. |
Price |
16-0637 |
$153.00 |
|
|
|
| Evo Cylinder Tools allow installation of
stud to correct height or removal by locking
to stud. |
| VT No. |
Price |
Item |
16-1845 |
$37.00 |
Assembly Tool |
16-1846 |
$46.00 |
Extracting Tool |
|
|
|
|
|
 |
|
|
|
|
| SPI Hole Micrometers are
used to determine cylinder
bore size (2.80-3.20) |
| VT No. |
Price |
16-7433 |
$372.00 |
|
|
|
|
|
|
 |
|
|
|
|
|
 |
|
|
|
|
|
|
|
|
| Cylinder De-Glazer feature spring action
on the stones keep the stones against the
cylinder wall at the correct pressure.
Capacity 2” to 51/2”. |
16-0610 |
$50.00 |
De-Glazer |
16-1759 |
$40.00 |
Set of 3 replacement stones
220 medium grit |
16-0607 |
$46.00 |
Stone Set |
|
|
|
|
|
|
|
|
 |
|
|
|
|
|
| Cylinder Jig Assembly use to repair
stripped damaged cylinder base threads
up to a 4” bore, in engine case. This will
hold centerline and squareness to where
the factory intended them to be. All this
with the engine still in the frame using an
angle head drill (drill not included). Use on
all 1984-99 Big Twin Evo and 1986-up XL. |
| VT No. |
Price |
16-0891 |
$327.00 |
|
|
|
|
|
 |
|
|
|
|
|
|
| Multi-Blade Groove Cleaner offers a
one-piece blade arrangement for 1/16”,
5/64”, 3/32”, 1/8” and 3/16” groove widths.
Available for pistons 2 to 5 inches in diameter. |
| VT No. |
Price |
16-0619 |
$37.00 |
|
|
|
|
|
|
 |
|
|
|
|
|
| Piston Ring Grinder accurately sizes end
gap on any piston ring by rotary filing. |
| VT No. |
Price |
Item |
16-0976 |
$145.00 |
Grinder |
16-0722 |
$46.00 |
Replacement Cutter File |
|
|
|
|
|
|
|
|
 |
|
|
|
|
|
|
 |
|
| Piston Ring
Installer with
Safety Stop
insert ring
ends in jaws,
then expand
gently and slip over piston into groove. A
simple time saving tool.Wedge jaw handles
3/64” to 1/4”. Also removes rings
without damage. |
| VT No. |
Price |
16-0628 |
$24.00 |
|
|
|
|
|
|
|
|
| Head Bolt Torque Gauge for all Evos.
This accurate gauge allows the measuring
of 90° when tightening Evo head bolts.
Torquing sequence lasered on gauge. Use
on al 1984-up Evo models. |
| VT No. |
Price |
16-0679 |
$29.00 |
|
|
|
|
|
|
|
|
|
|
|
| Crankshaft Stabilizer Bracket acts as
third hand. Sliding over crank splines, and
bolting to a primary mount hole prevents
crank from turning while installing pistons,
cylinders or rings. |
| VT No. |
Price |
16-5051 |
$24.00 |
|
|
|
|
|
|
|
|
|
|
|
| 1261
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
