Ignition

Crane HI4TC Ignition for TC88 Carbureted Engine Models offers multi-spark performance, variable advance curves and a digital rev limiter. It is a plug in replacement of the stock module and is compatible with the factory security system.

A crankshaft position sensor is employed to establish accurate firing. Rear cylinder timing can be offset from -5° to +4°; the same for initial timing. Both are easily adjusted by means of rotary switch on the unit. An additional rotary switch is used to select the advance curve, with choice of ten families. This enables the ignition to optimize the performance potential of the Twin-Cam 88® in any stage, from stock to wildly modified. Rotary switches also control the built-in Sequential Rev Limiter, which is adjustable from 1,500 to 9,900 RPM, and won't cause "popping and banging" like conventional rev limiters. Benefits of multiple spark system include easier starting (hot or cold), better low-speed driveability and off-idle response. It pulses up to nine sparks per cycle at idle and three sparks ups to 6,000 RPM, which also stops spark plug fouling and lean-surge. VT No. Price Year 32-3160 $326.00 1999-03 32-3180 $326.00 2004-up

Crane HI-4E Ignition Modules/Module-Coil Kits. .Improved, Adjustable Spark Curve Produces Strong Torque/Power Increases! .Multi-Spark Technology Delivers Cleaner Low-End, Idling, Crisper Throttle Response. .Easy Plug-In Installation. No Harness Replacement required on 1991-up Bikes. (1980-94 requires VT No. 32-9014 (OEM 32408-90) Harness Kit) .Selectable Single-Fire or Dual Fire. .Adjustable Rev-Limit, 500 to 9,900 RPM in 100 RPM increments! .Accurate, Easy Rear Cylinder Timing Offset. .Billet Aluminum, External Mounted. .Kits include module, coil and spark plug wires. VT No. Price Item Description 32-0806 $296.00 Module only 1980-94 with7 Pin connector. Note: 1980-90 requires harness kit VT No. 32-9014 32-4101 $449.00 Kit As Above 32-0807 $296.00 Module only 1995-up with 8 Pin Connector 32-4102 $431.00 Kit As Above

Sensor Cup Kit includes special screws to fit all "Sensor" type ignition kits. VT No. Price 32-0559 $10.00

Controller by Comp Cams is a programmable performance ignition computer featuring: . High Energy output with accurate spark timing. . Uses stock rotor and pickup in both single and dual fire operation. . 14 factory programmed curves . User friendly programming with switches. . RPM switch for nitrous 2-stage rev limiter. . Programmable rev limit. . Bolt-on easy installation with style connectors.

Controlled by Comp Cams VT No. Price V-Thunder Description Year Model Engine 32-0672 $285.00 VTI2000A Ignition Controller 1995-earlier 1993-earlier Softail, Dyna, FXR, FX w/ conv. Harness XL except 1994-up FLT & XL models Shovel 32-0673 $285.00 VTI2000B Ignition Controller 1996-up Softail, Dyna, FXR, FX w/ conv. Harness 1993-up Softail, Dyna, FLT except F.I., XL Shovel Evo 32-0733* $24.00 VTI2001A Power Adapter 7-pin Connector Fits all 32-0672 applications 32-0734 $33.00 VTI2001B Power Adapter 8-pin Connector Fits all 32-0673 applications 32-0741 $72.00 VTE2200 RPM Switch Harness For use with VTI2000 A or B *Note: For 1979 and earlier models use pickup VT No. 32-9020 OEM 32400-80A and rotor VT No. 32-9087 OEM 32402-83. For 1991 and earlier models use OE harness VT No. 32-9014 OEM 32408-90.

274

HTML content Copyright ©2006 Mas Classics-Vintage American Motorcycle Parts All rights reserved www.masclassics.com JPG images Copyright ©2006 by Tedd Cycle, Incorporated. All rights reserved. No part of this publication may be reproduced without prior written permission of the publisher.V-Twin MFG. Brand Products - Tedd Cycle Inc, Box 473 Vails Gate, NY 12584